Deskripsi
EP-CTU3200 Planetary Track Drive Gearbox
Brevini CTU3200 Compatible Replacement | EVER POWER
Itu EP-CTU3200 by EVER POWER delivers 32,000 Nm output torque in a compact 2-to-3-stage sealed planetary housing, engineered as a cost-effective, form-fit replacement for the Brevini riduttori CTU3200. Designed for mid-to-large tracked construction and earthmoving equipment, this unit combines wide ratio coverage with all-terrain sealing to minimise unplanned downtime.
Gambaran Umum Produk
Primary markets: 18-25 t hydraulic excavators, crawler-mounted pipe layers, tracked soil stabilisers and large tunnelling machines. The EP-CTU3200 features an extended ratio range of 25:1 to 120:1 achieved through a configurable 2-or-3-stage arrangement, allowing a single part number to serve machines with significantly different travel speed requirements without any housing change.
Parameter Teknis
| Parameter | Nilai |
|---|---|
| Model | EP-CTU3200 |
| Menggantikan | Brevini riduttori CTU3200 |
| Max Output Torque | 32,000 Nm |
| Tahapan Perlengkapan | 2 – 3 |
| Rentang Rasio | 25:1 – 120:1 |
| Kecepatan Input Maksimum | 2,800 rpm |
| Efisiensi | >= 96% (per stage) |
| Reaksi | <= 10 arcmin |
| Bahan Perumahan | Besi cor ulet GGG50 |
| Pelumasan | Synthetic ISO VG 220 (bath, factory filled) |
| Kelas Perlindungan | IP68 |
| Suhu Operasional | -30 degC to +85 degC |
| Perkiraan Berat | ~88 kg |
| Brake | Spring multi-disc / hydraulic release (standard) |
Prinsip Kerja
In 3-stage configuration, the first two stages use a standard 3-planet arrangement for high input speed tolerance; the final stage upgrades to a 4-planet carrier for enhanced torque capacity at the output. This hybrid arrangement allows the EP-CTU3200 to handle both the high-speed continuous travel phase and the high-torque low-speed pushing phase of excavator track operation without thermal de-rating.
Itu floating sun gear shaft design automatically centres the load distribution across all planet gears, compensating for minor shaft misalignment caused by track chain tension deflection and chassis flexion during operation.
Keunggulan Utama
| ▲ 2-or-3-Stage Flexibility One part number covers 25:1-120:1 ratio range – simplifies procurement and spares stocking. |
▲ Floating Sun Gear Self-equalises planet load distribution, extending tooth life under chassis deflection loads. |
| ▲ 4-Planet Output Stage Higher tooth contact count reduces root stress, supporting rated torque at extreme duty cycle. |
▲ -30 degC Cold Start Arctic-grade synthetic oil and cold-rated FKM seals ensure clean cold-morning engagement. |
| ▲ Direct Brevini CTU3200 Replacement Same flange pattern, spline spec and brake port locations – swap in place with no machine modification. |
|
Teknologi Struktur dan Material
All gear blanks are precision-forged from Baja pengerasan permukaan 17CrNiMo6, vacuum degassed for superior core impact toughness. Post-carburising case depth is controlled to 0.9-1.2 mm; tooth flanks are profile-ground to ISO/DIN accuracy class 5. The output flange is machined with a T-slot register face for accurate sprocket centering without adjustment shims. O-ring face seals use HNBR compound for resistance to biodegradable hydraulic fluids increasingly specified on European and Japanese job sites.
Skenario Aplikasi Khas
| Industri | Machine Type | Key Requirement |
|---|---|---|
| Construction | 20 t excavator | High-cycle travel; 3-stage for fast tramming speed on road. |
| Tunnelling | Crawler-mounted shotcrete robot | Slow precise positioning in confined tunnel bores; high torque for gradients. |
| Pipeline | Tracked pipelayer (side-boom crane) | Smooth slow-speed travel alongside open trench with heavy suspended pipe. |
| Agriculture | Large tracked harvester chassis | Wide ratio range handles both field travel speed and headland turning torque. |
Panduan Seleksi
- Drawbar Pull (kN) – Required traction force on worst-case gradient x safety factor (1.3 minimum).
- Jumlah Tahap – Choose 2-stage for max travel speed; 3-stage for maximum torque at given motor size.
- Motor Shaft Interface – Splined (DIN 5480) or keyed shaft; confirm bore diameter.
- Brake Release Pressure – 20-40 bar available hydraulic pressure to release spring brake.
- Biodegradable Oil Requirement – Specify HNBR seals if bio-hydraulic fluid is used on site.
Contact our application team for a ratio and torque selection report.
Brevini CTU3200 vs. EVER POWER EP-CTU3200
Disclaimer: EVER POWER references the Brevini riduttori CTU3200 model number solely to help customers identify a compatible replacement. We do not manufacture or imply affiliation with Brevini. No intellectual property of Brevini is reproduced. Our replacement unit is an independently designed product that is dimensionally and functionally compatible.
| Aspek | Brevini CTU3200 | EVER POWER EP-CTU3200 |
|---|---|---|
| Harga | European OEM premium | Cost-competitive (significant saving) |
| Waktu Tunggu | 8-16 weeks | 3-5 weeks |
| Stage Flexibility | Fixed stage count per model | 2-or-3-stage on same flange platform |
| Cold Start Rating | Standard | -30 degC Arctic option available |
| OEM/ODM | Not available | Custom drawings accepted |
EVER POWER supplies matched hydraulic travel motors for a complete track drive unit. Ask us about motor pairing.
Sertifikasi Mutu dan Komitmen Layanan
- ISO 9001:2015 – Full batch traceability from steel melt to finished unit.
- Tanda CE – EU Machinery Directive 2006/42/EC.
- Garansi 18 bulan from dispatch.
- Dimensional drawing archive maintained for 10 years per unit serial number.
Read more at KEKUATAN SELAMANYA Tentang Kami.
Case Studies – Engineer Field Notes
| Negara | Aplikasi | Feedback |
|---|---|---|
| Norway | 20 t excavator fleet for fjord-side infrastructure project | “Cold-start at -28 degC with no sluggishness. The floating sun design clearly handles the rocky terrain chassis flex we experience.” – Site Manager, Bergen contractor. |
| Korea Selatan | Tunnelling crawler robot for subway expansion | “Slow-speed precision was critical for our robotic lining installation. EP-CTU3200 delivered consistent low-speed control throughout the 14-month project.” – Mechanical Lead, Seoul. |
| Argentina | Large tracked soybean harvester chassis replacement | “Six units replaced in one off-season. Cost saving allowed us to order two spare sets for inventory. Delivery was faster than any European supplier could offer.” – Procurement Manager, Rosario. |
Pertanyaan yang Sering Diajukan
Q: Can I switch between 2-stage and 3-stage in the field?
A: Stage count is set at factory. Specify your required ratio range at order and we will configure correctly. Mixed-stage sets are available for fleets needing different travel speeds.
Q: Are HNBR seals an additional cost option?
A: HNBR seals are available at minimal additional cost. Please specify “bio-hydraulic oil service” at order.
Bermitra dengan EVER POWER
EVER POWER serves machine builders and maintenance fleets on six continents. Explore our planetary drive replacement range or get a quote today. Visit planetary-gear-box.top.
