Penerangan
EP-EC2020 2-Stage Compact Planetary Gearbox
Brevini Riduttori EC2020 Compatible Replacement | EVER POWER
Yang EC2-series delivers the efficiency and ratio range of a 2-stage planetary design in a radially compact housing specifically engineered for tight-envelope OEM installations. The reduced housing diameter versus the ED2-series makes EC2 units the first choice for motor-integrated drives, AGV wheel hubs, linear actuator heads, robot joint drives and space-constrained automation equipment.
Yang EP-EC2020 menggantikan riduttori Brevini EC2020 ?? a 2-stage compact planetary gearbox delivering approximately 760 Nm output torque, ratio range 8:1 – 40:1, and IP rating IP65.
Parameter Teknikal
| Parameter | Nilai |
|---|---|
| Model | EP-EC2020 |
| Menggantikan | Brevini riduttori EC2020 |
| Tork Output | 760 Nm |
| Peringkat Gear | 2 |
| Julat Nisbah | 8:1 – 40:1 |
| Kelajuan Input Maksimum | 5,000 rpm |
| Kecekapan | >= 96% |
| Kelas Perlindungan | IP65 |
| Anggaran Berat | ~7 kg |
Prinsip Kerja
The compact design uses a thin-ring construction ?? the ring gear bore and housing outer diameter are minimised through careful gear module selection, reducing the housing diameter by up to 15% versus the standard ED2 series at the same torque rating. Both stages use needle-roller planet journals for maximum radial stiffness in the reduced-diameter housing, maintaining planet-to-ring gear mesh accuracy under cantilevered load conditions.
Kelebihan Teras
|
◆ Compact Radial Envelope
Up to 15% smaller OD vs ED2 ?? fits tight machine bores and hubs. |
◆ Needle Roller Planet Journals
Maximum planet radial stiffness in thin-ring housing. |
|
◆ Motor-Integration Compatible
Short axial length suits motor-gearbox integrated units. |
◆ 5,000 rpm High Input Speed
Servo and high-speed motor compatibility. |
|
◆ Direct EC2-Series Replacement
Same mounting dimensions as Brevini original. |
Teknologi Struktur dan Bahan
Housing is machined from 7075 aluminium alloy or GGG50 iron depending on size. Planet gears use 20CrMnTi carburised steel, ground to DIN 6. Thin-ring construction requires press-fit ring gear installation with Loctite 638 retaining compound for permanent bore fixation. Output shaft seals are double-lip NBR for dust and oil retention in compact housings.
Senario Aplikasi Lazim
| Industri | Permohonan | Manfaat Utama |
|---|---|---|
| Pembungkusan | Small bag sealing jaw | High cycle rate servo drive for jaw closing at 120 cycles/min. |
| Printing | Ink roller metering drive | Precise speed control for consistent ink film thickness. |
| Automation | Pick-and-place Z-axis | Low-inertia compact drive for high-speed vertical stroke. |
| Lab Equipment | Sample handling carousel | Quiet smooth rotation for automated analysis systems. |
Panduan Pemilihan
- Tork Output Diperlukan (Nm) ?? Sahkan puncak dan berterusan dengan faktor keselamatan (1.3-2.0 tipikal).
- Nisbah Gear ?? Kelajuan motor (rpm) / kelajuan output yang diperlukan (rpm).
- Kiraan Peringkat ?? 2-stage (2-stage compact) provides ratio 8:1 – 40:1.
- Antara Muka Motor ?? Jenis bebibir (metrik SAE/ISO), diameter aci dan kunci.
- Persekitaran Operasi ?? Kelas IP, suhu ambien, orientasi pemasangan.
Hubungi jurutera kami untuk semakan saiz aplikasi percuma.
Brevini EC2020 vs. EVER POWER EP-EC2020
Notis: EVER POWER references Brevini riduttori EC2020 solely for customer cross-reference. We are not affiliated with Brevini. Our EP-EC2020 is an independently designed product that is dimensionally and functionally compatible. No Brevini trademarks or intellectual property are reproduced.
| Aspek | Brevini EC2020 | EVER POWER EP-EC2020 |
|---|---|---|
| Harga | Premium Eropah OEM | Kompetitif ?? Penjimatan 30-45% tipikal |
| Masa Utama | 6-16 minggu bergantung pada saiz | 2-6 minggu |
| Peringkat Gear | 2 | 2 |
| Waranti | Piawaian 12 bulan | Piawaian 18 bulan |
| Penyesuaian | Terhad | Lukisan OEM/ODM diterima |
EVER POWER juga membekalkan motor elektrik dan hidraulik yang sepadan untuk pakej sistem pemacu yang lengkap. Bertanya tentang penjodohkan motor.
Pensijilan Kualiti dan Komitmen Perkhidmatan
- ISO 9001:2015 pembuatan dan pengurusan kualiti yang diperakui.
- Penandaan CE ?? Mematuhi Arahan Jentera EU 2006/42/EC.
- Waranti 18 bulan from shipment date covering all EP-EC2020 manufacturing defects.
- Respons teknikal 48 jam untuk isu lapangan.
- Kedapkan kit dan alat ganti haus yang telah disediakan untuk penghantaran cepat.
Ketahui lebih lanjut di EVER POWER Tentang Kami.
Kajian Kes ?? Nota Lapangan Jurutera
| Negara | Permohonan | Maklum Balas Pelanggan |
|---|---|---|
| Japan | Servo precision drive, electronics OEM | “Perfect fit confirmed in all 24 units. EVER POWER provided full inspection reports within 24 hours.” ?? Engineering Lead, Tokyo. |
| Jerman | Robotic joint drive, automation system builder | “Drop-in replacement with no re-commissioning. 18-month warranty accepted by our quality team.” ?? Design Engineer, Munich. |
| Amerika Syarikat | Medical table positioning drive, hospital equipment OEM | “FDA documentation supplied promptly. Zero failures across 8 units in 12 months.” ?? Quality Manager, Boston. |
Soalan Lazim
Q: How much smaller is the EC2 housing compared to ED2?
A: The EC2 outer diameter is typically 12-15% smaller than the equivalent ED2 unit at the same torque rating. Axial length is also reduced by approximately 10%.
Q: Is the EC2 available with hollow through-shaft output?
A: A hollow output bore option is available for most size classes. Specify bore diameter and keyway at order.
Bekerjasama dengan EVER POWER
EVER POWER menyokong pembina mesin OEM dan pasukan penyelenggaraan di seluruh dunia. Layari kami julat penggantian penuh, terokai keupayaan kami, atau hubungi kami hari ini untuk sebut harga pantas. Lawati kotak-gear-planet.top.
