Açıklama
EP-CTD2051 Planetary Track Drive Gearbox ?? 20,510 Nm
Brevini CTD2051 Compatible Replacement | EVER POWER
O EP-CTD2051 bridges the gap between compact and mid-size tracked equipment, delivering 20,510 Nm output torque with a 2-to-3-stage configurable planetary design. As a direct replacement for the Brevini riduttori CTD2051, this unit is widely used in 5-10 t class excavators, tracked scissor lift bases and light utility crawler vehicles where mounting space is tight but torque requirements exceed mini-class units.
Ürün Genel Bakışı
The EP-CTD2051 targets 5-10 t tracked construction equipment, scissor lift and aerial work platform (AWP) crawler bases, tracked compact carriers and utility track vehicles. Its configurable stage count ?? 2-stage for faster travel speed, 3-stage for maximum pulling torque ?? is managed by swapping a single internal stage module at the factory, keeping the external housing and flange pattern unchanged.
Teknik Parametreler
| Parametre | Değer |
|---|---|
| Model | EP-CTD2051 |
| Yerine geçer | Brevini riduttori CTD2051 |
| Maksimum Çıkış Torku | 20,510 Nm |
| Dişli Aşamaları | 2 or 3 (configurable) |
| Oran Aralığı | 18:1 – 90:1 |
| Maksimum Giriş Hızı | 3200 devir/dakika |
| Yeterlik | >= 96% per stage |
| Tepki | <= 10 arcmin |
| Konut Malzemesi | Sfero Döküm GGG50 |
| Yağlama | Synthetic ISO VG 150 / VG 220 |
| Koruma Sınıfı | IP67 |
| Çalışma Sıcaklığı | -25°C ila +80°C |
| Yaklaşık Ağırlık | ~42 kg |
| Fren | Yaylı çok diskli / hidrolik serbest bırakma |
Çalışma Prensibi
The configurable design operates by selecting either a 2-stage or 3-stage planet train module installed inside the same housing shell. In 2-stage mode the unit delivers maximum travel speed ?? suited to AWP bases that traverse job sites quickly between lifts. In 3-stage mode the same housing delivers maximum tractive effort for pushing through soft ground or climbing steep ramps.
O yüzen güneş ekipmanı in both configurations self-centres the load across all planets, compensating for minor motor shaft run-out and extending planet bearing life in high-cycle AWP applications where the travel motor starts and stops hundreds of times per shift.
Temel Avantajlar
|
◆ 2/3-Stage Configurable
Same housing serves two ratio ranges ?? reduces OEM inventory from two part numbers to one. |
◆ Floating Sun Gear
Self-equalises planet loading, extending bearing life in high-start-stop AWP duty cycles. |
|
◆ Compact 42 kg Body
Fits 5-10 t class machine track frames without structural modification. |
◆ IP67 All-Terrain Sealing
Handles mud, fine dust and pressure wash common on construction sites and rental fleets. |
|
◆ Direct CTD2051 Replacement
Identical flange and brake port layout ?? bolt-in, no adaptation required. |
Yapı ve Malzeme Teknolojisi
The housing is pressure-die-cast from GGG50 sünek dökme demir and finish-machined to H7 bore tolerance. Planet gears use 17CrNiMo6 yüzey sertleştirme çeliği carburised to 0.8-1.1 mm case depth and ground to DIN 5 accuracy. The brake disc stack uses sinterlenmiş metal sürtünme diskleri rated for 80,000 engagement cycles ?? important for AWP applications where the parking brake is engaged and released multiple times per hour.
Tipik Uygulama Senaryoları
| Sanayi | Makine / Kullanım | Temel Gereksinim |
|---|---|---|
| AWP / Lifting | Tracked scissor lift base (8-12 m) | 3-stage for ramp climbing; 2-stage for yard tramming between lifts. |
| Yapı | 6-8 t compact excavator | Wide ratio range covers both trench digging (high torque) and road travel (higher speed). |
| Utility | Tracked compact carrier / dumper | IP67 handles quarry dust and water crossings common in utility groundworks. |
| Maintenance | Pipeline inspection crawler | Slow precise positioning in confined trenches; spring brake holds on inclined pipe sections. |
Seçim Kılavuzu
- Aşama Sayısı ?? 2-stage for max speed; 3-stage for max tractive effort. State required ratio.
- Machine Weight (t) ?? Confirm drawbar pull requirement for worst-case gradient.
- Görev Döngüsü ?? AWP high-start-stop vs continuous excavator travel affects brake specification.
- Motor Flanşı ?? SAE-B 2-bolt or 4-bolt; shaft diameter and keyway specification.
- Rental Fleet Requirement ?? Rental fleets benefit from seal kit pre-packing; specify at order.
Contact our application engineers for a stage-count selection recommendation.
Brevini CTD2051 vs. EVER POWER EP-CTD2051
Önemli Duyuru: EVER POWER references the Brevini riduttori CTD2051 model number solely to assist customers in identifying a compatible replacement. We do not manufacture, sell, or claim any affiliation with Brevini riduttori. No trademarks or intellectual property of Brevini are reproduced. The EP-CTD2051 is an independently designed and manufactured product that is dimensionally and functionally compatible.
| Bakış açısı | Brevini CTD2051 | EVER POWER EP-CTD2051 |
|---|---|---|
| Fiyat | OEM premium | Rekabetçi satış sonrası oranı |
| Kurşun zamanı | 6-14 weeks | 2-4 weeks |
| Stage Flexibility | Fixed per model | 2 or 3-stage same housing |
| Brake Disc Life | Standart | 80,000 cycle sintered discs |
| Garanti | 12 ay | 18 ay standart |
Complete track drive kits (motor + gearbox) available from EVER POWER. Ask about kit pricing.
Kalite Sertifikaları ve Hizmet Taahhüdü
- ISO 9001:2015 certified quality management.
- CE İşareti ?? EU Machinery Directive compliant.
- 18 ay garanti sevkten.
- Sintered brake disc replacement kits stocked for priority dispatch.
Visit EVER POWER Hakkımızda for our full quality profile.
Vaka Çalışmaları ?? Mühendis Saha Notları
| Ülke | Başvuru | Müşteri Geri Bildirimi |
|---|---|---|
| Birleşik Krallık | Tracked scissor lift fleet renewal, 18 units | “We needed a unit that could handle the repeated brake cycling of a rental AWP. After 12 months and 200,000+ brake engagements across the fleet, not a single brake failure.” ?? Fleet Engineer, Midlands rental company. |
| Güney Kore | 7 t compact excavator OEM supply, 30 units/month | “The 2/3-stage flexibility let us rationalise from two Brevini part numbers to one EVER POWER number. Procurement is much simpler now.” ?? Purchasing Manager, Busan OEM. |
| Poland | Pipeline inspection crawler for gas network maintenance | “Slow-speed precision in narrow trenches is critical. The floating sun gear eliminated the vibration we had with the previous supplier.” ?? Field Engineer, Warsaw. |
Sıkça Sorulan Sorular
Q: Can I change stage count after installation?
A: Stage count is set at the factory. It cannot be changed in the field. Please specify required ratio at order.
Q: What brake release pressure is required?
A: Standard spring brake releases at 20-30 bar hydraulic pressure. Specify if your machine circuit pressure differs.
Q: Is a seal kit included with each unit?
A: A standard seal kit is optionally included. Specify at order; recommended for rental fleet purchases.
EVER POWER ile Ortaklık Kurun
Join OEM builders and service teams across six continents who rely on EVER POWER track drives. Browse our full replacement product catalogue veya request a quotation today. Ziyaret etmek planetary-gear-box.top.
