Description
EP-PWD3300 Planetary Winch Drive Gearbox – 33,000 Nm
Brevini PWD3300 Compatible Replacement | EVER POWER
Le EP-PWD3300 represents EVER POWER’s solution for high-cycle, high-torque winching where continuous duty is the norm. Engineered as a functional equivalent to the Brevini riduttori PWD3300, this unit is built for machine builders and operators who need 33 000 Nm output torque with predictable, maintenance-friendly performance.
Présentation du produit
Key applications: heavy deck cranes on cargo vessels, land-based drilling rig drawworks, offshore derrick assist winches, heavy-duty forestry cableway systems. The EP-PWD3300 features a reinforced output-stage planet carrier with a 4-planet configuration to maximise load-sharing efficiency and extend bearing life in continuous-duty cycles.
Paramètres techniques
| Paramètre | Valeur |
|---|---|
| Modèle | EP-PWD3300 |
| Remplace | Brevini riduttori PWD3300 |
| Couple de sortie maximal | 33 000 Nm |
| Étapes d'engrenage | 3 |
| Nombre de planètes (étape de sortie) | 4 planètes |
| Plage de ratios | 30:1 – 200:1 |
| Vitesse d'entrée maximale | 1,000 rpm |
| Efficacité | >= 95% (per stage) |
| Matériau du boîtier | fonte ductile GGG50 |
| Classe de protection | IP66 |
| Température de fonctionnement | -30 degC to +80 degC |
| Poids approximatif | ~145 kg |
| Option de freinage | Spring wet multi-disc / dry disc / none |
| Traitement de surface | Apprêt époxy + couche de finition polyuréthane |
Principe de fonctionnement
Le 4-planet output stage is the defining feature of the EP-PWD3300. Conventional 3-planet designs distribute load across three contact points. Adding a fourth planet increases simultaneous tooth contacts, reducing tooth root stress by approximately 25% at the same torque level – resulting in longer fatigue life or greater tolerance of peak overload transients. Helical-cut teeth across all stages further reduce noise and smooth the torque curve for precision crane operations.
Principaux avantages
| ► Étage de sortie à 4 planètes 25% lower tooth stress – extended life in continuous high-cycle duty. |
► Full Helical Tooth Profile Quieter operation and gradual load engagement across all three stages. |
| ► High Overload Tolerance Handles 2.8x rated torque peaks without plastic deformation of gear teeth. |
► Long Service Interval Oil change intervals up to 2,500 hours with recommended synthetic lubricant. |
| ► Direct Drop-In for Brevini PWD3300 Identical bolt pattern, shaft dimensions and brake release port locations minimise retrofit downtime. |
|
Technologie des structures et des matériaux
All internal gear components are manufactured from 20CrMnTi and 17CrNiMo6 case-hardening steels. Carburising depth is controlled to 0.9-1.3 mm. After heat treatment, all gears undergo profile grinding to ISO accuracy grade 5. The output carrier is a single-piece forged construction. Radial shaft seals on the output side are double-lip FKM units rated for continuous immersion in synthetic oils.
Scénarios d'application typiques
| Industrie | Application | Notes de scénario |
|---|---|---|
| Marin/Offshore | Cargo vessel derrick winch | High cycle rate requires extended bearing life – 4-planet stage delivers this. |
| Forage | Land rig drawworks fast-line winch | Peak torque transients during pipe-stuck events are absorbed without damage. |
| Sylviculture | Running skyline cableway bull-block drive | Helical gearing reduces noise in noise-sensitive logging areas. |
| Heavy Lift | Gantry crane load equaliser winch | Smooth torque output essential for synchronised multi-crane lifts. |
Guide de sélection
- Confirm Duty Cycle Class (S1 continuous or S3/S6 intermittent) to determine thermal de-rating.
- State Peak Torque including shock factor. EP-PWD3300 handles up to 2.8x rated torque.
- Interface moteur – SAE flange type, pilot diameter, shaft keyway dimensions.
- Pression de desserrage des freins – typically 25-50 bar hydraulic; confirm available circuit pressure.
- Drum Bore and Spline – provide drum drawing for our team to confirm fit.
Contact EVER POWER engineers for your free selection assessment.
Brevini PWD3300 vs. EVER POWER EP-PWD3300
Clause de non-responsabilité: Reference to Brevini riduttori PWD3300 is purely for customer cross-reference convenience. EVER POWER does not manufacture, distribute or hold any certification on behalf of Brevini. The EP-PWD3300 is an independent EVER POWER design.
| Aspect | Brevini PWD3300 | EVER POWER EP-PWD3300 |
|---|---|---|
| Nombre de planètes (étape de sortie) | 3 planètes | 4 planets – higher load share |
| Prix | OEM premium | Cost-competitive alternative |
| Délai de mise en œuvre | 10 à 18 semaines | 3 à 6 semaines |
| Tolérance aux surcharges | Note de 2,5x | Note de 2,8x |
| OEM/ODM Service | Not available | Full OEM drawing service available |
Complete motor and gearbox packages available. Ask about our motor supply program.
Certifications de qualité et engagement de service
- ISO 9001:2015 – Full manufacturing traceability and documentation package.
- Marquage CE – European machinery compliance declaration supplied with each unit.
- Garantie de 18 mois – Covers all material and manufacturing defects.
- Hydrostatic leak test on every unit before shipping.
Read more at EVER POWER À propos de nous.
Études de cas – Notes de terrain d'ingénieur
| Pays | Application | Retour |
|---|---|---|
| Saudi Arabia | Land drilling rig drawworks auxiliary, desert environment | “Operated at 48 degC ambient without oil degradation. Thermal management is clearly engineered into the design.” – Rig Manager, Eastern Province. |
| Pologne | Steel plant ladle crane auxiliary hoist upgrade | “The 4-planet design has clearly improved bearing life over our previous 3-planet units.” – Maintenance Director, Katowice. |
| Nouvelle-Zélande | Forestry skyline cableway main winch | “The noise reduction from the helical gears is noticeable and welcomed by operators in native forest buffer zones.” – Operations Manager, Northland. |
Foire aux questions
Q: Why choose 4 planets over the standard 3-planet design?
A: Four planets share output torque across more simultaneous tooth contacts. Each tooth carries less stress, extending pitting fatigue life – particularly important in high-cycle continuous-duty applications.
Q: Can you supply with Bosch Rexroth / Parker / Eaton motor flanges?
A: Yes. We stock or machine flanges to fit major hydraulic motor brands. Provide the motor model number in your enquiry.
Devenez partenaire d'EVER POWER
Explore the Gamme complète de pièces de rechange Brevini ou Demandez un devis dès aujourd'hui. Visite boîte-d'engrenages-planétaire.top for our complete portfolio.
