China Aokman Drive Speed Reducers Ngw Series Planetary Gearbox with Electric Motor planetary gearbox cost

Solution Description

Solution Description

AOKMAN Travel Speed Reducers NGW Sequence Planetary Gearbox With Electrical Motor

NGW sequence gearboxes consist of single-stage(NGW11-NGW121),two-phase(NGW42-NGW122) and stree-phase(NGW73-NGW123).

one.Product Variety
NGW, NGW-L, NGW-S, NGW-QJ 

2.Applications
NGW Planetary Gear Models is commonly employed in numerous locations this sort of as metallurgy, mine, lifting, transportation, textile, cement, gentle industry, chemical, pharmaceutical, dye printing and so on. 

Comprehensive Photos

3.Merchandise Traits
(1) Little volume, light fat, properly-knitted structure, massive transmission electrical power and high load capability. In contrast with the normal cylindrical gear reducers of the very same stage, its fat is lower 1/2 and quantity is only 1/2-1/3 of the former.
(2) Large transmission effectiveness. 1-phase is up to 97%, 2-stage 94%, 3-stage ninety one%.
(3) The variety of transmission electrical power is very broad, from 1kw to 1300kw.
(4) NGW Planetary Gear Units is made with hard-tooth-faced, and can be utilised extensively and in long interval.
(5) Huge transmission ratio 

4.Technological Info(NGW)
Original Model NGW Sequence
Shafts Situation: In Line
1 Stage: NGW11~NGW121 Ratio: 2.8~12.five
2 Stage: NGW42~NGW122 Ratio: 14~a hundred and sixty
3 Stage: NGW73~NGW123 Ratio: 180~2000

New Design and style NGW Collection
Shafts Position: In Line, Parallel Shaft
NAD(NAF) – 1 Phase, Foot Mounted(Flange Mounted), In Line
NAZD(NAZF) – 1 Phase, Foot Mounted(Flange Mounted), Parallel Shaft
NBD(NBF) – 2 Stage, Foot Mounted(Flange Mounted), In Line

Solution Parameters

NGW-S Series Planetary Gearboxes
Shafts Placement: Right Angle
Gearset: Spiral Bevel Gear Pair Built-in With Planetary Equipment Established
two Phase: NGW-S42~NGW-S122 Ratio: 11.2~eighty
three Phase: NGW-S73~NGW-S123 Ratio: 56~500
 

Stage Model Size                   Ratio Rated Electrical power
Single-stage NGW11~NGW121  one~12 two.8~twelve.5 two. 8-1314KW
Two-phase NGW42~NGW122  1~twelve fourteen-one hundred sixty .7-517KW
A few-phase NGW73~NGW123  one~six one hundred eighty-2000 .16-47.1KW

Kinds Sizes Nominal Ratio Enter Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD two hundred,224,…1800,2000 4~5.six

six.3~9

fifty~400mm

40~360mm

sixty~630mm
NAF 200,224,…five hundred,560 four~5.6

6.3~9

fifty~130mm

forty~100mm

sixty~220mm
NAZD two hundred,224,…1400,1600 ten~eighteen thirty~240mm 60~560mm
NAZF two hundred,224,…five hundred,560 10~eighteen 30~85mm sixty~220mm
NBD 250,280,…1800,2000 twenty~25

28~fifty

thirty~280mm 80~630mm
NBF 250,280,…500,560 twenty~25

28~50

thirty~80mm 80~220mm
NBZD 250,280,…1400,1600 56~one hundred twenty five 28~170mm 80~560mm
NBZF 250,280,…five hundred,560 fifty six~125 28~55mm eighty~220mm
NCD 315,355,…1800,2000 112~400 twenty five~150mm one hundred twenty~630mm
NCF 315,355,…five hundred,560 112~400 25~50mm one hundred twenty~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm a hundred and twenty~630mm
NCZF 315,355,…five hundred,560 450~1250 25~45mm a hundred and twenty~220mm

Packaging & Delivery

Organization Profile

After Revenue Services

Pre-sale services one. Pick gear product.
two.Design and style and manufacture items in accordance to clients’ unique need.
three.Prepare specialized personalized for clients
Services for the duration of offering 1.Pre-verify and acknowledge items ahead of shipping and delivery.
two. Assist customers to draft solving plans.
After-sale solutions one.Assist consumers to get ready for the very first development scheme.
two. Train the 1st-line operators.
three.Just take initiative to remove the trouble swiftly.
4. Give technological exchanging.

FAQ

one.Q:What sorts of gearbox can you create for us?

A:Main items of our firm: UDL sequence velocity variator,RV collection worm gear reducer, ATA series shaft mounted gearbox, X,B sequence gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and 1000’s of requirements
2.Q:Can you make as for every custom drawing?
A: Of course, we provide customized services for clients.
3.Q:What is your terms of payment ?
A: 30% Progress payment by T/T right after signing the contract.70% before supply
four.Q:What is your MOQ?
A: 1 Set

If you have any demand from customers for our items remember to come to feel free to make contact with me.

Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

###

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

###

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

Planetary Gearbox Basics

If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
planetarygearbox

Wheel drive planetary gearboxes

Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.

Spur gears

There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
planetarygearbox

Helical gears

A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.

Various sizes

There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
planetarygearbox

Applications

This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.

China Aokman Drive Speed Reducers Ngw Series Planetary Gearbox with Electric Motor     planetary gearbox costChina Aokman Drive Speed Reducers Ngw Series Planetary Gearbox with Electric Motor     planetary gearbox cost
editor by czh 2023-01-31

Recent Posts