설명
EP-PWD3700 Extreme-Duty Planetary Winch Drive Gearbox – 37,000 Nm
Brevini PWD3700 Compatible Replacement | EVER POWER
그만큼 EP-PWD3700 is EVER POWER’s flagship planetary winch drive gearbox. Engineered to directly replace the Brevini riduttori PWD3700, this unit achieves a class-leading 37,000 Nm rated output torque and a maximum ratio of 300:1, making it the go-to choice for deepwater crane operators, offshore heavy-lift contractors and extreme-duty industrial hoist builders.
제품 개요
Target applications: deepwater crane main hoists (300 m+ depth), semi-submersible rig drawworks, heavy pipelay tensioner main drives, offshore wind turbine foundation installation cranes, and large-format industrial furnace car drives. The EP-PWD3700 is available with optional integrated oil temperature monitoring 그리고 vibration sensor ports for integration into predictive maintenance systems.
기술적 매개변수
| 매개변수 | 값 |
|---|---|
| 모델 | EP-PWD3700 |
| 교체합니다 | Brevini riduttori PWD3700 |
| 최대 출력 토크 | 37,000 Nm |
| 기어 단계 | 3 – 4 |
| 비율 범위 | 35:1 – 300:1 |
| 최대 입력 속도 | 800 rpm |
| 연속 열 제한 | 65 kW |
| 과부하 용량 | 3.0x rated torque (momentary) |
| 주택 자재 | GGG50 ductile iron + marine epoxy (C5M) |
| 매끄럽게 하기 | 합성 ISO VG 320 또는 PAO VG 460 |
| 보호 등급 | IP66 / IP68 optional |
| 작동 온도 | -35°C ~ +90°C |
| 대략적인 무게 | ~190 kg |
| Monitoring Options | Oil temp sensor port, vibration sensor boss |
| 브레이크 옵션 | 봄철 습식 멀티 디스크 / 건식 디스크 / 없음 |
작동 원리
The EP-PWD3700’s 4-stage planetary arrangement stacks four concentric reduction stages coaxially. Each stage’s planet carrier becomes the sun shaft input to the next, achieving 300:1 reduction in a compact form factor. The output stage bearing pre-load system is factory-set using precision shims so the tapered roller bearing assembly carries both radial rope loads and axial fleet angle loads without play developing over service life. An optional external oil cooler circuit is available for tropical-climate duty above 40 degC ambient.
핵심 이점
| ★ Class-Leading 37,000 Nm Torque Top-of-range PWD series capacity – handles the most demanding crane and hoist loads. |
★ 300:1 in a Single Housing Eliminates tandem gearbox systems, reducing overall drivetrain length and weight. |
| ★ 상태 모니터링 준비 완료 Oil temperature and vibration sensor ports enable Industry 4.0 predictive maintenance integration. |
★ 3.0x Overload Tolerance Momentary overload capacity handles unexpected load spikes without gear tooth damage. |
| ★ C5M Marine Coating + IP68 Option Full offshore corrosion and immersion protection for the most aggressive environments. |
|
구조 및 재료 기술
The EP-PWD3700 uses 18CrNiMo7-6 vacuum-arc-remelted (VAR) steel – the same grade used in aircraft and wind turbine main gearboxes – carburised to 1.0-1.5 mm case depth and ground to DIN ISO 1328 accuracy class 5. The housing interior is shot-peened to improve fatigue resistance. All external fasteners are stainless steel A4-80 to prevent galvanic corrosion in offshore installations.
일반적인 적용 시나리오
| 산업 | 애플리케이션 | 시나리오 참고 사항 |
|---|---|---|
| Deepwater | Offshore heavy crane main hoist (300 m+) | 300:1 ratio provides precise positioning at depth with large hydraulic motors. |
| Oil & Gas | Semi-sub rig drawworks main drive | 37,000 Nm handles combined hook and drill-string weight spikes during jarring. |
| Renewable Energy | Offshore wind monopile upending crane | Slow controlled rotation of 500+ tonne monopiles requires high torque at very low speed. |
| Steel Industry | EAF electrode positioning drive | Precise low-speed drive under extreme thermal radiation environment. |
선택 가이드
- Maximum Hook Load (kN) – Define peak with all rigging dynamic factors applied.
- Required Lowering Speed (m/min) – Used to derive drum speed and required ratio.
- Number of Part Lines – Affects drum torque calculation.
- Motor Specification – Dual-motor input flanges available for very high torque requirements.
- Monitoring Requirements – State if oil temperature and vibration monitoring ports are needed.
- 선급협회 – DNV, BV, ABS, Lloyd’s; third-party inspection arranged accordingly.
Engage our heavy-lift engineering team for a detailed selection study at no cost.
Brevini PWD3700 vs. EVER POWER EP-PWD3700
부인 성명: The Brevini riduttori PWD3700 model is referenced solely to assist customers identifying a functionally compatible alternative. EVER POWER is not affiliated with Brevini. The EP-PWD3700 carries its own original design specifications and independent warranty.
| 측면 | Brevini PWD3700 | EVER POWER EP-PWD3700 |
|---|---|---|
| 가격 수준 | High-end OEM Europe | Substantially lower total cost of ownership |
| 리드 타임 | 14-22 weeks standard | 5-8 weeks |
| Max Ratio | 표준 범위 | Up to 300:1 single unit |
| 상태 모니터링 | 표준이 아님 | 센서 포트는 기본 옵션입니다. |
| Class Society Inspection | Available (at premium) | Available at competitive rate |
| Dual-Motor Input | Special order | Standard configuration option |
EVER POWER can supply matched hydraulic piston motors or electric torque motors as a complete drive system.
품질 인증 및 서비스 약속
- ISO 9001:2015 – Material traceability to melt certification.
- CE 마크 – EU Machinery Directive 2006/42/EC compliant.
- DNV GL / BV / ABS 3rd-party inspection 요청 시 제공 가능합니다.
- 18개월 보증 from despatch date.
- Dedicated after-sales account manager for registered heavy-lift customers.
Visit 에버 파워 회사 소개 for our full quality and company profile.
사례 연구 – 엔지니어 현장 기록
| 국가 | 애플리케이션 | 피드백 |
|---|---|---|
| United Arab Emirates | Offshore heavy crane main hoist, Persian Gulf | “The oil temperature sensor allowed us to optimise the cooling circuit remotely. No unplanned downtime in 12 months.” – Crane Superintendent, Abu Dhabi. |
| 대한민국 | Offshore wind foundation installation vessel main winch | “Dual-motor input option was essential for our synchronised lifting programme. EVER POWER engineered the flange arrangement to our drawing within 3 weeks.” – Lead Engineer, Busan. |
| Mexico | Semi-sub drill rig drawworks for deep Gulf wells | “We replaced 2 Brevini units with EP-PWD3700. Commissioning was straightforward and the dimensional match was exact. Significant cost saving versus the original OEM quote.” – Mechanical Supervisor, Veracruz. |
자주 묻는 질문
Q: Is 3.0x overload a one-time or repeatable rating?
A: The 3.0x rating covers momentary (less than 5-second) transient overloads. Repeated application must be reviewed by our engineers to assess cumulative fatigue impact.
Q: Can the gearbox be fitted with dual-motor input flanges?
A: Yes. A dual-input configuration allows two motors to share the driving torque. Contact us for the dual-input technical datasheet.
Q: What condition monitoring sensor types are supported?
A: G1/2 threaded boss positions for PT100 oil temperature probes and M8 tapped pads for accelerometer attachment. Compatible with major PLC and SCADA systems.
EVER POWER와 파트너십을 맺으세요
저희 웹사이트를 방문해 보세요. complete replacement product range에 대해 알아보세요 EVER POWER’s capabilities, 또는 contact our engineering team now. Homepage: 유성 기어박스 상단
