विवरण
EP-CTD2100 Planetary Track Drive Gearbox ?? 21,000 Nm
Brevini CTD2100 Compatible Replacement | EVER POWER
The EP-CTD2100 delivers 21,000 Nm output torque in a sealed, spring-brake-integrated planetary housing, engineered to replace the Brevini riduttori CTD2100 without any machine modification. Designed for 10-14 t tracked construction equipment, this unit introduces a helical first stage that reduces audible noise and gear mesh vibration ?? a feature increasingly specified by European OEMs seeking to meet workplace noise regulations.
उत्पाद अवलोकन
Primary applications: 10-14 t hydraulic excavators, tracked trenchers, crawler-mounted concrete pumps and medium-duty tracked dumpers. The helical first stage is the EP-CTD2100’s defining feature ?? it generates an axial contact ratio above 1.2, smoothing the torque handover between successive tooth engagements and producing measurably lower radiated noise compared to the straight-cut first stage used in most track drives at this torque level.
तकनीकी मापदंड
| पैरामीटर | कीमत |
|---|---|
| नमूना | EP-CTD2100 |
| के स्थान पर | Brevini riduttori CTD2100 |
| अधिकतम आउटपुट टॉर्क | 21,000 Nm |
| गियर चरण | 3 |
| अनुपात सीमा | 22:1 – 100:1 |
| अधिकतम इनपुट गति | 3,000 rpm |
| क्षमता | >= 96% per stage |
| Helical First Stage | Yes (noise reduction) |
| आवास सामग्री | नमनीय लोहा GGG50 |
| स्नेहन | Synthetic ISO VG 220 (factory filled) |
| संरक्षण वर्ग | IP68 |
| संचालन तापमान। | -25 डिग्री सेल्सियस से +80 डिग्री सेल्सियस तक |
| अनुमानित व़जन | ~55 kg |
| Brake | Spring multi-disc / hydraulic release |
काम के सिद्धांत
The three-stage arrangement uses a helical-cut first stage to absorb high-speed input from the travel motor with reduced noise and vibration. The torque amplified by stage 1 feeds into stages 2 and 3 (straight-cut, optimised for torque density), achieving the rated output ratio at the sprocket shaft.
The multi-disc wet brake between the motor interface and stage 1 is hydraulically released during travel and spring-applied at all other times. The disc stack is oil-cooled via a dedicated internal oil circulation groove, extending brake life in high-frequency stop-start duty.
मुख्य लाभ
|
★ Helical First Stage
Axial contact ratio > 1.2 ?? measurably lower noise and vibration versus straight-cut alternatives. |
★ Oil-Cooled Brake Stack
Internal oil circulation groove cools disc pack in high-frequency stop-start operations. |
|
★ IP68 Submersion Seal
Fully sealed for stream crossings, flooded trench work and aggressive pressure washing. |
★ 3-Stage Torque Density
21,000 Nm in a body sized for the 10-14 t class ?? no upsizing of track frame needed. |
|
★ Brevini CTD2100 Drop-In Fit
Identical flange dimensions and brake port locations ?? no adaptation components required. |
संरचना और सामग्री प्रौद्योगिकी
Helical first-stage gears are precision-hobbed from 17CrNiMo6 alloy steel, carburised to 0.8-1.1 mm and ground to DIN 5 accuracy. The straight-cut second and third stages use 20CrMnTi steel ground to the same accuracy class. The housing bore is hard-anodised internally in the bearing zones to provide an interference-fit surface that resists fretting corrosion under vibration loading. Output shaft seals are dual-lip एफकेएम फ्लोरोएलास्टोमर rated for synthetic gear oil at up to 120 degC.
विशिष्ट अनुप्रयोग परिदृश्य
| उद्योग | Machine / Use | Key Requirement |
|---|---|---|
| Construction | 12 t tracked trencher | High-frequency travel reversals; oil-cooled brake critical for brake longevity. |
| Concrete | Crawler-mounted concrete pump | Slow precise positioning alongside pour; low noise protects operator hearing. |
| खनन | 10 t underground development loader | Low-noise requirement in confined underground tunnels; IP68 handles mine drainage spray. |
| Demolition | 13 t tracked demolition machine | High shock loads from concrete breaking; helical first stage absorbs vibration spikes. |
चयन मार्गदर्शिका
- Noise Requirement (dBA) ?? Helical first stage is recommended when machine must meet EN 474 noise limits.
- Brake Cycle Frequency ?? High-frequency stop-start (> 60 cycles/hour) requires oil-cooled brake spec.
- आईपी रेटिंग ?? IP68 standard; confirm maximum continuous submersion depth if applicable.
- Motor Displacement ?? Provide cc/rev and shaft specification for ratio confirmation.
- परिचालन तापमान ?? Specify if ambient exceeds 40 degC for thermal de-rating check.
Contact our team for a noise and brake-cycle analysis for your application.
Brevini CTD2100 vs. EVER POWER EP-CTD2100
महत्वपूर्ण सूचना: EVER POWER references the Brevini riduttori CTD2100 model number solely to assist customers in identifying a compatible replacement. We do not manufacture, sell, or claim any affiliation with Brevini riduttori. No trademarks or intellectual property of Brevini are reproduced. The EP-CTD2100 is an independently designed and manufactured product that is dimensionally and functionally compatible.
| पहलू | Brevini CTD2100 | EVER POWER EP-CTD2100 |
|---|---|---|
| कीमत | European OEM premium | Competitive aftermarket pricing |
| समय सीमा | 8-14 weeks | 2-5 weeks |
| Helical Stage | Not standard | Helical first stage standard |
| Brake Cooling | Standard dry stack | Oil-cooled groove standard |
| गारंटी | 12 months | 18 महीने का मानक |
EVER POWER supplies matched low-noise hydraulic travel motors for the EP-CTD2100. Request a low-noise drive package.
गुणवत्ता प्रमाणन और सेवा प्रतिबद्धता
- आईएसओ 9001:2015 manufacturing and quality management.
- सीई चिह्नांकन ?? EU Machinery Directive 2006/42/EC.
- 18 महीने की वारंटी from shipment date.
- Gear profile inspection report supplied with each unit on request.
Explore our standards at एवर पावर हमारे बारे में.
Case Studies ?? Engineer Field Notes
| देश | आवेदन | ग्राहक प्रतिक्रिया |
|---|---|---|
| जर्मनी | 12 t tracked trencher, utility contractor | “The noise reduction was immediate and measurable. Our operator health monitoring dropped by 4 dB on the first day after retrofit. That alone justified the purchase.” ?? Safety Manager, Cologne. |
| ऑस्ट्रेलिया | Underground development loader, gold mine | “IP68 sealing held up perfectly in the wet drives where water is constant. Oil-cooled brake has shown zero wear increase after 3,000 cycles.” ?? Mine Maintenance Engineer, Kalgoorlie. |
| फ्रांस | 13 t demolition robot, urban project | “Urban demolition requires low noise for permits. EP-CTD2100 helped us secure a noise variance for a sensitive site near a school.” ?? Project Manager, Paris. |
अक्सर पूछे जाने वाले प्रश्नों
Q: Does the helical first stage require special lubrication?
A: No. Synthetic ISO VG 220, the same spec used throughout the unit, is fully compatible with helical gears and is factory-filled.
Q: What is the maximum continuous submersion depth for IP68?
A: IP68 is tested to 1 metre for 30 minutes continuous submersion per IEC 60529. Deeper or longer submersion requires the optional deep-submersion seal upgrade.
Q: Can the oil-cooled brake be retro-fitted to an existing non-cooled unit?
A: No ?? the oil circulation groove is machined into the housing casting. It cannot be retrofitted. Specify oil-cooled brake at order.
एवर पावर के साथ साझेदारी करें
EVER POWER supports low-noise, high-performance track drive requirements for OEM builders and retrofit projects. Explore our replacement range या contact us for a tailored quotation. Visit planetary-gear-box.top.
